RICOCHET is a 38′ (11.58m) Sport Fisherman Motor Yacht launched in 2019 by American shipyard WINTER CUSTOM YACHTS.

RICOCHET is located in Stuart Florida USA and is offered for sale for US $ 795,000 / € 725,000.

RICOCHET is Hull #30 built by Winter Custom Yachts and an experienced yacht and custom boat owner. She is truly a rare opportunity for anyone looking in the marketplace for a high-end, pedigree custom center console with all of the modern amenities and equipment.

RICOCHET is a versatile platform and finds herself at home on the fishing grounds or being used as a yacht tender. RICOCHET offers great sea-keeping abilities/performance and her Mercury Verado engines carry Mercury Platinum warranty coverage through 10/07/2024.

She is a Must-See for any custom boat enthusiast and can be conveniently seen in Stuart, Florida. Call today for more details and to arrange a private viewing. Additional photos available upon request.

POWER

• Triple Mercury Verado 400 HP Outboards, custom painted white
• Mercury Platinum warranty coverage in place through 10/07/2024
• Mercury engine services completed (May 2022)
• Mercury gauges and controls
• Mercury power steering
• Mercury fuel filters

MECHANICALS

• Side Power 12-volt DC Bow Thruster
• SeaKeeper SK3 gyro stabilizer (Warranty remaining through 07/18/2023)
• Jabsco salt water pump
• Jabsco Blaster fresh water pump
• (4) 1500 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch
• (2) 2000 GPH Rule bilge pumps with Ultra Safety Systems Jr float switch
• RULE sump boxes
• FRP discharges on hull sides
• Dometic freshwater flush head with 15 gallon holding tank
• 642 gallon fuel capacity
• 50 gallon fresh water tank
• 15 gallon hot water heater
• (2) Newmar 60-amp battery charger 12-volt, (3) bank
• New batteries installed (June 2022)
• C-Zone control system on all DC systems
• Custom Paneltronics panels
• 120-volt AC, 24-volt DC
• 30-amp, 240-volt AC service
• 12-volt DC lighting throughout
• All wiring guided by ABYC standards
• (2) Lumishore underwater lights in transom (NEW June 2022)
• Livorsi 1150 high speed trim tabs

TOP DECK

• Forward bow seating with ample storage within
• (6) 15 degree rod holders in bow cap
• (4) 8” pull up cleats on top deck
• Faux teak toe rail with chafe gear
• Custom removable bow pulpit and gear
• RC-5 low profile windlass
• MaxSet 8 polished SS plow anchor
• Genuine teak decking
• Radiused gunnel faces
• Ample storage on aft side of love seat for diver ladder and miscellaneous items
• Chipped ice from Eskimo Ice Chipper plumbed underneath forward love seat
• (2) Fuel fills on side gunnels for main tank and (1) fuel fill recessed in forward deck hatch for forward tank
• Water fill on side gunnels
• Waste access on gunnels
• Full pass through side door with gate

HARDTOP

• Custom Palm Beach Towers Hardtop
• Custom molded hardtop with polished aluminum frame T-top style
• Underside of hardtop painted in gray/matte finish
• Upgraded hardtop to incorporate thicker 3” hardtop
• Radar Pod
• Molded aft single 12-volt LED LUMITEC spreader light with molded pod
• Molded forward single 12-volt LED LUMITEC spreader light with molded pod
• Molded Navigation Lights
• Recessed dome lights 12-volt, tri-color
• (6) Rod holders welded to aft side of hardtop
• Anchor light on mast
• Molded in “Pancake” Birdsall Marine teaser reels
• 20” RIGID Spot style LED Light Bar
• Rupp Revolution Top Gun outrigger bases
• Rupp HD Carbon Fiber poles 18’
• Rupp HD Carbon Fiber Center Rigger
• One piece acrylic curtain enclosure

COCKPIT

• (6) 30 degree rod holders in cockpit
• (2) Hawse pipes on covering board top
• (2) 10” cleats mounted on side wall I cockpit
• Custom baitwell in transom
• Baitwells to feature laminated curved glass
• Custom livewell with recessed tuna tubes
• Genuine teak decking
• 26” freeboard from transom to bow
• Full pass through transom door with gate
• Additional dive door in starboard hull side
• Under gunnel accent lighting throughout
• Release Marine triple seat with flip-up bolster
• Concealed access to shore power and water spigots under gunnels
• (2) In-deck fish boxes
• Dive ladder on transom
• Access to lazarette and gyro compartment
• Frigid Rigid cooler with slides

CONSOLE

• Centerline helm with helm pod (faux painted)
• Glove box with USB charging outlets
• (4) Molded in drink holders
• (2) Simrad NSO 19″ Touchscreen Displays
• Simrad Open-Array Radar with 4 foot array and RI-12 interface box
• Simrad 3D structural scan module
• Simrad 3D Thru-Hull StructureScan Transducers with fairing block
• Simrad S5100 Sonar Module
• AIRMAR B175-M Medium Band CHIRP Transducer
• AP 44 VRF Pack Medium Capacity
• Simrad RS90 VHF Modular Kit
• Simrad HS35 Wireless Handset
• (2) Digital Antennas
• Simrad NAIS500 with NSPL500 splitter
• Simrad NAC-2 Autopilot
• Simrad WM-3 SiriusXM satellite weather and radio module
• Fusion BB300 R Black Box Stereo with wired remote, USB, and aux. port
• JL Audio M700/5 stereo amplifier
• (2) JL Audio MX770 marine cockpit speakers
• (1) JL Audio MX650 marine cockpit speakers
• (2) JL Audio 10″ marine subwoofer 175W
• FLIR MD-625 with joystick control unit
• GOST NavTracker System
• Wave WIFI RoguePro DB
• Linksys ES6350 Wireless Router
• Navionics Platinum Plus (Mexico/Central America)
• Navionics Platinum Plus (Central America West)
• RITCHIE 6″ Super Sport compass mount
• Simrad VHF
• RIGID LED Light Bar
• Mercury Smartcraft Gauges
• Molded drink holders in console at helm
• Glove box with USB charging outlet
• C Zone display to control systems
• Molded foot rest
• (3) Release Marine chairs with flip up bolsters
• Barro Ultra Leather Fabric
• Molded in curtain track on console

TOW PACKAGE

• Integrated solar panel charging system with monitoring capability
• WIFI Network Extender for connection to C-Zone up to 350’
• Custom Stainless Steel Towing Eye

INTERIOR

• Teak stair treads
• Quarter sawn teak interior
• Solid teak sole
• Cabinetry throughout interior with satin finish
• White painted surfaces
• Solid teak countertops
• Solid surface countertops with stainless steel undermounted sink
• Jabsco freshwater flush head
• Satin Southco Mobella McCoy door handles
• Satin Southco push button latches
• Recessed Imtra Ventura LED lights with white bezel in overhead
• Access to all electronics and AC panel
• Oversized bilge pumps
• Warning beacon light on top of tower to indicate bilge pump operation

GENERAL CONSTRUCTION

All bilges, engine room and equipment faired and painted with Alexseal Cloud White

• Walk Around construction
• Layer 1” Diab A500 foam on cabin
• Layer 1808 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy

EXTERIOR SURFACES

• A buildup of Alexseal fairing products followed by Alexseal primer to a finished surface
• Topsides: Alexseal Cloud White
• Hull: Alexseal Light Gray
• Boot Stripe: Alexseal Stars & Stripes Blue
• 1” solid stainless steel bumper metal

HULL BOTTOM

• (2) Layers ½” marine grade Okoume plywood
• Layer 1708 Vectorply biaxial fiberglass outside bottom impregnated with Pro Set Epoxy
• Layers 1708 Vectorply biaxial fiberglass on keel and chine
• Layers 1708 Vectorply biaxial fiberglass inside bottom up through hull side
• Laminated Douglas Fir stringers

HULL SIDES

• Hull side 2 layers 6mm Okoume plywood Loyds type 1088
• Layer 1708 Vectorply biaxial fiberglass impregnated with Pro Set Epoxy
• Laminated Douglas Fir rib bands
• Laminated Douglas Fir chine
• Laminated Douglas Fir sheer clamp